This is the product title

PDF Documents

25' Truckable Push boat tugs for sale

Truckable Push boat tugs for sale

Item # 87740

TRUCKABLE TUGS FOR SALE CUSTOM MADE TO YOUR REQUIREMENTS. GENERAL VESSEL SPECIFICATIONS: STEEL, DECK, SIDES, AND TRANSOM CONSTRUCTED OF 5/16" STEEL PLATE. HEAD LOG AND BOTTOM CONSTRUCTED OF 3/8" STEEL PLATE. ALL STEEL IS A36 STEEL. ONE FORWARD COLLISION BULKHEAD AND ONE AFT BULKHEAD CONSTRUCTED OF 1/4" STEEL PLATE LOCATED 6' 0" FROM BOW, AND 7' 6" FROM STERN LOG, WITH ONE 18" DIAMETER WATER TIGHT FLUSH MOUNT MAN HOLE COVER. ONE 18" DIAMETER WATER TIGHT FLUSH MOUNT MAN HOLE COVER. HULL FRAMING; DECK AND SIDES FRAMED LONGITUDINALLY. DECK IS FRAMED WITH 3" X 3" X 1/4" ANGLE ON 24" CENTERS. SIDES ARE FRAMED WITH 3" X 4" X 1/4" ANGLE ON 27" CENTERS. SIDES ON 5' HULL ARE FRAMED ON 20" CENTERS WITH 3" X 3" X 1/4" ANGLE. BOTTOM IS TRANSVERSELY FRAMED WITH 3" X 4" X 1/4" ANGLE SET ON 18" CENTERS. ENGINE ROOM HOUSE HOUSE IS 10' 0" LONG X 8' 6" WIDE X 4' 0" TALL OF 1/4" STEEL PLATE. OVERHEAD HATCH OF 5/16" STEEL PLATE FRAMED WITH 3" X 3" X 1/4" ANGLE. STAIRWAY ENTRANCE IN AFT OF HOUSE WITH OVERHEAD SELF LOCKING HATCH, 7' 6" HEAD ROOM. TWO 12" X 24" HORIZONTAL SLIDE ALUMINUM FRAMED WINDOWS, ONE ON EACH SIDE OF HOUSE. PILOT HOUSE PILOT HOUSE IS 5' 0" LONG BY 5' 6" WIDE BY 7' 0" TALL AND IS CONSTRUCTED FROM 1/4" PLATE. PILOT HOUSE SITS ON 3' FALSE FLOOR INCREASING EYE LEVEL TO 15' FROM INSIDE PILOT HOUSE. FALSE FLOOR CREATES STORAGE AREA ACCESSIBLE BY DOOR LOCATED EXTERIOR AFT SIDE OF FALSE FLOOR, TO BE USED AS STORAGE AREA FOR ELECTRONICS AND CUSTOMER EQUIPMENT. PILOT HOUSE IS FRAMED WITH 3/8" X 2" FLAT BAR THROUGHOUT. ALL PILOT HOUSE WINDOWS ARE OF ALUMINUM CONSTRUCTION. FRONT WINDOW IS 5' X 3' HORIZONTAL SLIDE, SIDE WINDOWS ARE 4' X 3' VERTICAL SLIDE, AND BACK WINDOW IS 2' X 3' VERTICAL SLIDE. STEEL ENTRY DOOR 2' X 6' LOCATED AFT OF PILOT HOUSE, WITH 12" X 24" VERTICAL SLIDE WINDOW. POWER TRAIN PACKAGE 650 H.P. JOHN DEERE TWO NEW JOHN DEERE MODEL 6090AFM ENGINES, EACH DEVELOPING 325 HORSEPOWER AT 2200 RPMS, FOR A TOTAL OF 650 HORSEPOWER. ENGINES HAVE A TWO YEAR OR 2000 HOUR MANUFACTURERS WARRANTY. [EXTENDED WARRANTY IS AVAILABLE FROM MANUFACTURER.] TWO NEW TWIN DISC MODEL MG 5091SC TRANSMISSIONS WITH 3:1 REDUCTION, TWIN DISC FACTORY WARRANTY. TWO AQUAMET 17 PROPELLER SHAFTS MEASURING 7' 0" BY 2 1/2" DIAMETER FITTED WITH TWO 34" X 26" FOUR BLADE BRONZE WORK HORSE STYLE PROPELLERS. HYDRAULIC STEERING SYSTEM EACH ENGINE EQUIPPED WITH 5 GPM GEAR DRIVEN HYDRAULIC PUMP MOUNTED TO ENGINE. HYDRAULIC TANK AND SELECTOR VALVE MOUNTED IN ENGINE ROOM WITH 18" HYDRAULIC RAM DRIVING THE RUDDERS. RUDDERS TWO MAIN STEERING RUDDERS OF 3/8" STEEL PLATE WITH 3/8 X 3" FLAT BAR BRACING AND 2 1/4 COLD ROLL RUDDER SHAFTS. 2 5/8" RUDDER SHAFTS ON 600 HP MODEL. [FLANKING RUDDERS AVAILABLE SEE OPTION NO. 1.] ENGINE CONTROLS TWO TWIN SINGLE LEVER CONTROLS WITH 33 C CABLES MOUNTED IN PILOT HOUSE. DECK HARDWARE VESSEL IS EQUIPPED WITH FOUR QUARTER BITS, AND ONE BOW BIT WELDED TO PAGE 4 MODEL 2514 DECK WITH 5/16" STEEL PLATE DOUBLERS. ONE TOW BIT CONSTRUCTED OF 6" PIPE FITTED THROUGH DECK AND WELDED. PIPE EXTENDS TO INTERIOR BOTTOM OF HULL AND IS WELDED . MODEL 2514 SINGLE ENGINE 350 HORSEPOWER VESSEL IS EQUIPPED WITH TWO NEW HAND OPERATED 5 TON NABRICO INDUSTRIAL WINCHES, WITH HAND WHEELS. MODEL 2514 TWIN ENGINE 600 HORSEPOWER VESSEL IS EQUIPPED WITH TWO NEW HAND OPERATED 20 TON NABRICO INDUSTRIAL WINCHES, WITH HAND WHEELS. WINCHES ARE BOLTED TO WELDED WINCH MOUNTS LOCATED ON PORT AND STARBOARD BOW. CENTER OF PUSH KNEES ARE SET 62" OFF VESSEL CENTERLINE. PUSH KNEES EXTEND 54" ABOVE DECK. PUSH KNEES ARE CONSTRUCTED OF 5/16" STEEL PLATE WELDED TO BOW. PUSH KNEES ARE FACED WITH 10" X 36" X 3" RUBBER PUSH KNEE PADS. (EXTENDED PUSH KNEES AVAILABLE, SEE OPTION 12). VESSEL IS EQUIPPED WITH FOUR PERMANENT LIFTING EYE PADS. ONE EYE MOUNTED IN EACH QUARTER OF VESSEL. RUB RAILS OF 4" X 5.4 POUND PER FOOT CHANNEL WELDED CONTINUOUS DOWN SIDES OF HULL 4" BELOW DECK LINE. VESSEL EQUIPPED WITH BULL RAILS CONSTRUCTED OF 3/16" STEEL PLATE EXTENDING 12" ABOVE DECK LINE, CONTINUOUS AROUND VESSEL. HAND RAILS OF 3/4" GALVANIZED PIPE ARE ATTACHED TO ENGINE ROOM HOUSE. ADDITIONAL CONSTRUCTION INFORMATION WINDOWS ARE INSTALLED WITH STAINLESS STEEL BOLTS AND NYLON INSERT LOCK NUTS. STERN TUBES ARE 4" DOUBLE EXTRA HEAVY PIPE AND STERN BEARINGS ARE 2 1/4" X 3 1/8" OR 2 1/2" X 3 1/8" DETERMINED BY POWER TRAIN PACKAGE. HULL PENETRATION POINT WELDED CONTINUOUS WITH DOUBLERS OF 5/16" STEEL PLATE. STRUTS ON 350 HP MODEL CONSTRUCTED OF 3/4" X 6" FLAT BAR. STRUTS ON 600 HP MODEL CONSTRUCTED OF 1" X 6" FLAT BAR. STRUTS EXTEND FROM STERN TUBE TO HULL WITH 5/16" STEEL PLATE DOUBLERS WELDED CONTINUOUS. PROPELLER AND RUDDER PROTECTION INCLUDE STEEL SHOES CONSTRUCTED IN A T STYLE OF 1" X 6" FLAT BAR WITH PERPENDICULAR 3/4" X 4" FLAT BAR. SHOES EXTEND FROM POINT FORWARD OF HULL PENETRATION POINT OF STERN TUBES TO RUDDER SHAFTS. STUFFING BOX IS TWO BOLT BRASS, MOUNTED ON FORWARD END OF STERN TUBES. (LASDROP GENERATION II DRIPLESS STUFFING BOXES AVAILABLE, SEE OPTION 11). RUDDER TUBES ARE 3" DOUBLE EXTRA HEAVY FOR 2 1/4" SHAFTS OR 3" SCHEDULE 160 FOR 2 ½" SHAFTS. RUDDER TUBES ARE WELDED THROUGH DECK AND BOTTOM OF HULL WITH 5/16" STEEL PLATE DOUBLERS. FRONT WINDOW OF PILOT HOUSE SLANTED FORWARD TO REDUCE GLARE. RUDDER RACK IS 1" GALVANIZED SERRATED GRATING. SPECIFICATIONS AND PRICES SUBJECT TO CHANGE WITHOUT NOTICE DUE TO DESIGN CHANGES AND PRODUCT AVAILABILITY. ALL PRICES QUOTED ARE F. O. B. OUR YARD OF CONSTRUCTION

Model: 25' Truckable Push boat tugs for sale
Manufacturer: Truckable Push boat tugs for sale
Qty: 1
Hours: 0
HP: 600
KW: 0
Cooling: Heat exchanger
Ratio: 0:1
Vessel Information
Vessel Length: 25
Vessel Fuel: 400 gal.
Vessel Beam: 14'
Vessel Draft: 5'

IMPORTANT: Our automatic e-mail quotes (e-mails you a price usually in 10 minutes 24 hours a day 7 days a week) and is designed to give you an approximate price for a requested unit as quickly as possible. The final cost of a unit is affected by other factors including freight, storage, repairs, quantity, discounts, etc. If the approximate price of the unit is within your range, please contact us more directly by phone, e-mail, or fax to get a more exact price. Specific used units may be sold at any time and are subject to prior sale. You may wish to inquire about our NO RISK 100% REFUNDABLE DEPOSIT--it is contingent on your inspection or inspection by a qualified mechanic or Factory Authorized Dealer. If the quoted unit(s) meet your needs and budget, we suggest you move quickly. This will e-mail you a quote for the item number shown above.

CONTACT A SALES AGENT BY CALLING
954-523-7007